شبیه سازی های درایو های الکتریکی

Location damaged power cables.
Fault location copper telecom cables.
Coaxial cable fault location.
Fault location wiring infrastructure.
Detection of breaks, short circuits, damage caused by dampness and other changes in impedance of the cable.
Graphic depiction of damage the cable with automatic indication the distance to fault on the screen.

Features :

automatic or manual mode:

the automatic fault location (AFL),
mode with manual range selection and sensitivity,
single measurement triggered manually or scanning continuous,

11 available ranges from 7 m to 4000 m selected in manual mode or matched automatically,
maximum length of cable up to 4000 m one end of the cable,
"Dead zone" measure limited to 0.5 m,
2.5 "LCD screen with backlight,
scan automatically or manually trigger,
sensitivity set manually or automatically adjusted,
adjustable impedance matching,
propagation coefficient adjustment 1% to 99%,
waterproof and resistant to mechanical housing.
small size and weight.
economical power system - 30 hours of continuously scan on one battery set.

This item includes :

Black Crocodile Clip 1kV 20A
M2 Carrying Case
1kV Red Crocodile Clip 20A
Double-Wire Test Lead 0.6m

2 : سپس لازمست مسیر کابل توسط ردیاب کابل مشخص شود :

نمونه ردیاب کابل :

مشخصات فنی :

DATASHEET LKZ 1500

LKZ-1500 insobs v2.04 GB

قیمت حدودی :LKZ2000 _ SONEL : مبلغ 1,100,000,000 تومان

Product characteristics

The LKZ-1500 locator set, consisting of a transmitter and receiver, allows for location, identification and tracking of the route of objects buried in the earth, i.e

power cords and cables, control cables, telecommunications cables,
underground elements of lightning protection systems, cathodic protection systems,
water and sewage systems,
fuel transmission systems (pipelines, gas pipelines)
heating systems and pre-insulated pipes.

The sets of LKZ series are an invaluable support in earthworks carried out for various industries, including energy, installation, construction, railway, telecommunications, water and sanitary, heating, geodetic and many others

LKN-1500 transmitter introduces a specific signal to the tracked objects, enabling LKO receivers to route in the active mode. The receivers operate also in a passive mode that uses the network frequencies and telecommunications signals present in the facility

LKO-1500 receiver facilitates the work of the user to with many features, including visualization of the cable routing in the tested object or a greater number of frequencies to choose from. It is also distinguished by the option of tracing cable short-to-earth faults with the use of additional accessories

Transmitter

Transmission of double frequency signals.
The mode of limiting the voltage of the transmitted signal.
Transmitter power: 1 W, 2 W, 5 W, 10 W.
Operation in direct galvanic or inductive connection mode - internal transmitting antenna.
Compatible with transmitting clamps.
Works with Sonel transmitting clamps at frequencies up to 1024 Hz.
Continuous or interval mode of operation that extends battery life.
Case housing.

Receiver

Active mode:

work with LKN-1500 transmitter at the frequencies of 273 Hz, 526 Hz, 1024 Hz, 8928 Hz, 33 kHz,
work with transmitters other than LKN-1500 at the frequencies of 491 Hz, 512 Hz, 982 Hz, 2000 Hz, 2048, Hz 8440 Hz, 9828 Hz, 10000 Hz.

Passive mode – work at the frequencies of:

50 Hz, 60 Hz, 100 Hz, 300 Hz, 550 Hz, 1450 Hz,
RADIO (10...36 kHz),
SB (48 Hz...14 kHz).

Location depth up to 10 m.
Operation with external probes.

Locator functions

Determine the direction of cable placement, position of the cable relative to the receiver axis (has a compass function).
Determine the current and residual depth of the cable, both in active mode (with transmitter) and in passive mode (without transmitter).
Save the route of placing an object on the map. Memory up to 10,000 coordinates.
Possibility of finding damaged cable locations.

The device, with any GPS module and dedicated program (LKZ Terminal), that is provided with the set, will allow you to plot the route of the underground object and mark the location of single measurement positions on the map. Communication of the LKZ with GPS module is through the Bluetooth

Sonel LKZ Terminal

The application works with the Sonel LKZ-1500 wire and cable locator. By replacing the external GPS module, it allowing the user to define and record the geographic coordinates of the cable route

The application additionally enables

live positioning preview,
measuring the distance to a specific point on the route,
export of routes saved in LKO-1500 to the phone’s memory,
reading routes from the phone’s memory,
preview of the saved values of all parameters,
data export to PC

Sonel LKO Terminal

A dedicated PC program for handling data stored in Sonel LKO-1500. It allows you to map a route from your location and read the data stored in the receiver

The data includes

coordinates of the place of measurement according to GPS information,
reading the depth of the object and value of current flowing in it,
the direction of the forced current,
operating frequency,
date and local time at the time of measurement according to GPS information,
export of route data to a file.

3 : سپس با داشتن فاصله و مسیر کابل منطقه مورد نظر مشخص می شود

حال لازمست نقطه دقیق آن مشخص شود پس توسط دستگاه فرستنده پالس ، پالس به کابل ارسال می شود و توسط گیرنده نقطه مورد نظر مشخص می شود :

یکی از این دستگاه ها دستگاه زیر می باشد :

Tanbos T20 TDR 0-35KV Underground Power Cable Fault Location System Locator Equipment Tester Detector

لازم بذکر است مقاومت 1 کیلومتر سیم نمره 35 برابر 1.14 خواهد بود

Cable locator Cable-locator Tdr time-domain reflectometer time-domain-reflectometer Lkz 1500 Lkz-1500 Tanbos t20 Tanbos-t20 مسیر یاب کابل

ali دوشنبه 20 آذر 1402 ساعت 18:35

0 نظر

شبیه سازی های درایو های الکتریکی

پیوندها

ابر برجسب

جدیدترین یادداشت‌ها

بایگانی

جستجو

تست فازمتر القایی آمپر متر کلمپی UNI-T 210E

45 آموزش راه اندازی و نصب نیروگاه خورشیدی

44 نحوه پیدا کردن نقطه معیوب کابل زیر زمینی قدرت